DJI ZENMUSE X5S CAMERA AND GIMBAL
Approved Used DJI Zenmuse X5S Camera and Gimbal
DJI Zenmuse X5S Camera & Gimbal:
The Zenmuse X5S was designed for Professional Aerial Imaging.
The New Generation of Zenmuse From DJI:
The Zenmuse is equipped with the new and improved Micro 4/3 Sensor, the Zenmuse X5S has a dynamic range of 12.8 stops with a better signal to noise ratio and colour sensitivity the X5R. It supports up to 8 x standard M4/3 lenses (including a zoom lense) with focal lengths ranging from 9mm-45mm, allowing you more variety for image capturing.
The new processing system for the Inspire 2 makes the Zenmuse X5S capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes video plus 4K 60fps using H.264 and 4K 30fps using H.265 (both at 100Mbps). It has continuous DNG burst shooting at 20fps with 20.8MP images also supported.
Unlike the DJI Inspire 1 Series, the Inspire 2 separates the CineCore 2.0 image processing system from the camera and integrates it into the drone. This means that the sensor and optical system are detachable and can easily be reattached using a newly designed quick-release connector. Designing the camera system in this way protects the sensor from magnetic interference. It also allows a range of lightweight cameras to be connected when required by different scenes.
The updated M4/3 sensor allows the Zenmuse X5S to capture high-resolution images with incredible high quality when combined with the CineCore 2.0 image processing system. With a pixel size of 3.4μm, this 20.8MP sensor captures more details than the previous sensor. It has 12.8 stops of dynamic range as well as a better signal to noise ratio and better colour sensitivity than the X5R, allowing you to create clear, low noise images in low light locations.
Using CineCore 2.0, the Zenmuse X5S records video at a maximum resolution of 5.2K/30fps in CinemaDNG 12bit1, 5.2K 30fps Apple ProRes 422 HQ and 4K 30fps Apple ProRes 4444 XQ 2.You can have additional recording options including video in 4K/60fps using H.264 or oversampling video in 4K/30fps using H.264/H.265, both with a bitrate of 100Mbps.
The DJI CINESSD card and a highly optimised FAT32/exFAT file system ensure that footage from the Zenmuse X5S is transferred directly through the DJI CINESSD Station card reader to a computer at higher speeds without any additional software. CinemaDNG or Apple ProRes workflows can be used for post-processing.
What’s in the Box?
Zenmuse X5S x 1
Camera Body Cap x 1
Lens Rear Cap x 1
Storage Box x 1
Can the Zenmuse X5S be used as a standalone camera?
No, use it only with the Inspire 2 and Matrice 200 Series
What storage devices can be used with the Zemuse X5S.
A micro SD card and DJI CINESSD .
Available at DroneworksIreland